
Deck Installation
New decks laid out for the span, the soil and the snow load your lot actually has.
What this involves →Decks for Montreux — custom homes under the pines off Mount Rose Highway, with design review to match the setting.
No obligation. Every estimate starts with a walkthrough of the site and a straight conversation about what the ground, the span and the budget will allow.

Building here
Montreux is a gated golf community on the wooded slopes off Mount Rose Highway, unincorporated Washoe County. The houses are custom, the setting is forested, and the standard of finish people expect from an outdoor structure here is correspondingly high. A deck that would pass unremarked in a valley subdivision will look out of place against a Montreux house.
That expectation runs alongside a genuinely demanding set of physical conditions. The elevation puts Montreux well above the Meadows floor, and ground snow load here is high enough that many parcels sit at or beyond the 70 psf figure at which Washoe County’s guidance calls for engineered plans on an uncovered deck. Snow sits on a structure for months. Footings go into decomposed granite over rock. Pines shade the deck and drop needles into every gap.
The design review is the third factor. Montreux has architectural oversight, and it has views on materials, colours, railing style and how a structure reads from neighbouring properties and from the golf course. That review runs in parallel with the county building permit on its own timetable, and it is far cheaper to design to it from the start than to argue with it afterwards.

Three things shape a Montreux deck.
Custom homes set a standard an outdoor structure has to meet. That shows up in details — concealed fasteners, a proper trim and fascia package, mitred corners, lighting integrated rather than added — and those details cost time rather than exotic materials.
At Montreux elevations the published ground snow load frequently reaches the 70 psf threshold that triggers engineered plans on an uncovered deck. Plan for the engineering step rather than hoping the parcel falls below it.
A committee with a position on materials, colours, railing style and visibility from neighbouring lots and the course. It runs on its own schedule alongside the county permit.
What we build in Montreux
The same six services, applied to what this ground and this elevation actually present.

New decks laid out for the span, the soil and the snow load your lot actually has.
What this involves →
Rot, loose ledgers, split boards and failing rails put right before they turn into a rebuild.
What this involves →
Tearing out a deck that has reached the end of its life and rebuilding on sound footings.
What this involves →
Capped composite and PVC boards for owners who would rather not re-stain every other summer.
What this involves →
Cedar, redwood and pressure-treated pine built to move with Nevada temperature swings.
What this involves →
Guardrails, cable and metal infill that meet code height and open-space limits.
What this involves →Before you start
Not a code list. These are the things that most often change a design or a price in Montreux.
Montreux questions
Yes, and in practice it covers more than whether you may build one. Expect the committee to have a view on decking material, colour, railing style and infill, and on how the structure reads from neighbouring properties and from the golf course.
It is a separate process from the Washoe County building permit and runs on its own timetable. Design to the guidelines from the outset; retrofitting an objection into a finished deck is the expensive route.
Very likely. The published ground snow load at Montreux elevations commonly reaches or passes the 70 psf figure at which Washoe County’s guidance calls for engineered plans on an uncovered deck, and the height and projection triggers apply on top of that.
Confirm your parcel’s figure with Washoe County Building and Safety before assuming either way. Discovering the requirement at plan review is the costly version.
Mostly details that are invisible individually and obvious in aggregate. Hidden fasteners rather than screw heads across the field. A picture-frame border so cut ends never face out. Fascia and stair risers in matching material. Mitred rather than butted corners. Lighting run during framing instead of surface-mounted afterwards.
None of that is exotic material; it is time. It is also the difference between a deck that reads as part of the house and one that reads as an addition.
Two ways. Shade keeps the surface damp, which is hard on timber and largely removes the heat objection to composite. And needles fill the gaps between boards and hold water there, which is precisely where you least want it.
Slightly wider gapping helps and regular clearing helps more. On a heavily canopied Montreux lot, composite decking over a properly detailed timber frame is a defensible choice.
Yes, and it is worth deciding early because the wiring wants running during framing rather than afterwards. Stair riser lights, post cap lights and under-rail strips are the usual pieces, and all of them look considered when they are planned and improvised when they are not.
Any exterior electrical work has its own permit and inspection requirements, which we will raise as part of the overall submittal.
Nearby
Conditions change quickly around here. Each of these has its own page.
See all twenty-five on the service areas page, or start from the Sparks homepage.
Next step
Send us your community design guidelines along with the brief. In Montreux they shape the deck as much as the structure does.
No obligation. Every estimate starts with a walkthrough of the site and a straight conversation about what the ground, the span and the budget will allow.
Tell us about your deck project below and we will follow up to set up a free estimate.